The Air Intake is installed on a 1999 Honda Prelude VTEC. I show you the basics of Installing Headlights on your Prelude.


As you can see the Stock Air box on the left. It is that big black plastic piece to the left of the battery.


First Step is to removed the top portion of the box. This is usually done by removing to screws with a philips screw driver. Make sure that screwdriver is long because it’s usually pretty far down there.


Next up is the piping. This piece fits perfectly where the box once was. You just have to tighten it with one Screw (flat head in most cases.)


Add the Cone Filter. Double check to make sure it’s all in place.


Now their is just one more screw that holds the cone filter in place. Tighten that up and your good to go.


This Page has had 304 views Since 4/22/09.